Fortec Elektronik AG

Lechwiesenstraße 9
86899 Landsberg am Lech
Phone: +49 (0) 8191 91172-0
Fax: +49 (0)8191 21770
sales@fortecag.de
www.fortecag.de

The Fortec Elektronik AG offers besides their business as a leading distributor of embedded computers, displays and power supplies, design and development of baseboards for Computer-on-Modules, such as COM Express™, ETX®, DIMM-PC® and other x86-based technologies. The CAD libraries contain a wide range of function blocks. These can be used for easy implementation without big complexity to save development time and reduce costs significantly. In addition to customer-specific developments, the Fortec AG offers through its subsidiaries, the assembly of the carrier board and the functional kits. And all with one single source!

Services

  • Hardware design for computer on modules, x86, RISC, FPGA
  • Software design for Windows OS, Linux, driver and firmware programming, CAN stack, Realtime
  • Manufacturing, assembly, housing design, assembly, testing environment


ETX®-BB

ETX®-BB
The ETX®-BB is based on the proven ETX®-standard and was developed regarding the employment behind 12,1" displays. The ETX®-BB has a lot of extensions, like LPT, USB and LAN. The board can additional be extended over PC/104 modules, DIMM-PC® extensions or the multi-functional serial bus with Piggyback modules. Whom the quantity of possibilities is not enough, can add a PISA Backplane to add further PCI or ISA cards.

Key Features

  • For direct assembly behind 12" Displays
  • Multi-functional serial bus over Piggyback Modul (up to 6 channels)
  • PC/104 extension

Board Details

  • Market Segments: Automotive/A.Supply, Industrial Automation, Medical, POS/POI-Point of Sale/Point of Info, Test & Measurement
  • ETX® Baseboard
  • For direct assembly behind 12" Displays
  • Multi-functional serial bus over Piggyback Modul (up to 6 channels)
  • LPT Port
  • 2 x USB 2.0
  • 10/100 Mbit LAN
  • PC/104 extension
  • 2,5" HDD directly mountable via secondary IDE connector
  • PISA Slot for the use of backplanes
  • 2 x DIMM-PC® extension
  • Power supply over Backplane or external connector
  • Size: 250 mm x 190 mm


ETX®-BC1

ETX®-BC1
The ETX®-BC1 was specially developed for the use in industrial computers and/or Embedded PCs, where high shock, vibration and temperature resistance as well as the stability in relation to EMV conditions are more important.

Key Features

  • Basis for ETX®-Modules, ETX 3.0 compatible
  • LVDS 1/2 channel (JILI Interface)
  • I²C / SM-Bus # PCI/104 Interface

Board Details

  • Market Segments: Automotive/A.Supply, Gaming/Entertainment, Industrial Automation, Medical, POS/POI-Point of Sale/Point of Info, Test & Measurement
  • Basis for ETX®-Modules, ETX 3.0 compatible
  • VGA, HD-DSUB-15
  • LVDS 1/2-Channel, 5/3,3V TFT-power supply
  • COM1/2, RS232 (RS485/RS422 optional), DSUB9
  • CF-Card-Slot
  • IDE (2mm) for 2,5" HDD
  • PCI/104 Interface
  • Parallel Port (SPP/EPP/ECP-Mode)
  • Floppy Interface (alternative for LPT)
  • PS/2 (Mouse/Keyboard)
  • 2 x USB 2.0
  • Ethernet 10/100, RJ45
  • Status-LED (HDD, LAN, Power, 2 x User programmable)
  • Hardware Monitor (Temp, 5V/3,3V, Tacho Fan)
  • I²C / SM-Bus
  • Backlight On/Off for Darkboot
  • 18 - 36 VDC power supply
  • Audio
  • Operating System: Windows XP (embedded), Linux
  • Size: 145 mm x 245 mm


rBaseETXe (Ultra compact COM Express™ Baseboard)

rBaseETXe
The rBaseETXexpress® was designed as reference platform for the whole COM Express™ Family. Two LVDS-Outputs, LED-backlight-converter, resistive touchcontroller, CAN-Bus, single power supply including battery management etc. offers a versatile field of application also for special cases.

Key Features

  • COM Express™ compatible miniPCI Express Slot DVI-I 2 x LVDS (JILI30), dual view CAN-Bus

Board Details

  • Market Segments: Automotive/A.Supply, Gaming/Entertainment, Industrial Automation, Medical, POS/POI-Point of Sale/Point of Info, Test & Measurement
  • miniPCI Express-Slot
  • DVI-I
  • 2 x LVDS (JILI30), dual view
  • Res. Touchcontroller 4/8 wire
  • LED-Backlight converter (configurable)
  • TFT-Backlight control (On/Off, Dimming, Power)
  • CAN-Bus with galvanic isolation (1kV)
  • Battery management
  • HD-Audio with 6W amplifier
  • Gigabit-LAN
  • 4 x USB
  • 2 x RS232
  • 2 x SATA inkl. Power
  • IDE 44-pin
  • USB-DOM
  • 19 x GPIO
  • SD Card Slot opt.
  • 3 independent fan control
  • Size: 170 x 145 mm
  • 9 - 28 V power supply with ATX-function


rBaseETXe-1000 (COM Express™ Baseboard for Panel PCs)

rBaseETXe-1000
The BaseETXexpress®-1000 as a replacement for the Kontron ePanel designed, a baseboard with rich functionality and flexible interfaces has been developed. With a customer-specific I/O board, all interfaces can be easily run and additional functions can be implemented - such as an electrical isolation for the existing CAN bus. The consistent implementation of our HMI concept, this board is also suitable for applications that must interact with users.

Key Features

  • COM Express™ pinout type I compatible
  • Interfaces can be carried out on customer-specific I/O-brackets
  • CAN-Bus
  • Gigabit Ethernet
  • 12 V power supply with ATX-function

Board Details

  • Market Segments: Automotive/A.Supply, Gaming/Entertainment, Industrial Automation, Medical, POS/POI-Point of Sale/Point of Info, Test & Measurement
  • COM Express™ pinout type I compatible
  • Interfaces can be carried out on customer-specific I/O-brackets
  • miniPCI-Express slot
  • resistive Touch controller 4/5 wire
  • DVI-D, LVDS (JILI30)
  • LED backlight converter (configurable)
  • TFT backlight control (on/off, dimming, power)
  • HD-Audio with 6W amplifier
  • SD-Card Slot
  • 2 x SATA incl. power
  • CAN-Bus
  • Gigabit Ethernet
  • 4 x USB
  • 2 x RS232 (1 x TTL)
  • 4 x fan control
  • 12 V power supply with ATX-function
  • Size: 150 mm x 130 mm


rBaseETXe-HMI-CAN (COM Express® Baseboard for HMI Applications)

rBaseETXe-HMI-CAN
An economical and compact baseboard based on the COM Express® standard pin-type I. The rBaseETXexpress®-HMI-CAN has been developed for human-machine interface applications and therefore features are available to interact with users. Special features like resistive touch controller, LED backlight converter, CAN-Bus interface and a miniPCI-Express slot are included. An SD-Card slot and 2 SATA ports, including power supply for the hard drives guarantee an optimal connection of mass storage devices. All necessary voltages are generated onboard. There is only one input voltage of 12 V necessary.

Key Features

  • COM Express® pinout type I compatible
  • Resistive touch controller
  • LED backlight converter
  • CAN-Bus
  • 12 V power supply with ATX-function

Board Details

  • Market Segments: Automotive/A.Supply, Gaming/Entertainment, Industrial Automation, Medical, POS/POI-Point of Sale/Point of Info, Test & Measurement
  • COM Express® pinout type I compatible
  • miniPCI-Express slot
  • res. touch controller 4/5 wire
  • LVDS (JILI30)
  • LED backlight converter (configurable)
  • TFT backlight control (on/off, dimming, power)
  • HD-Audio with 6W amplifier
  • SD-Card slot
  • USB flash interface (USB-DOM)
  • 2 x SATA incl. power
  • CAN-Bus
  • Gigabit Ethernet
  • 4 x USB
  • 2 x RS232 (1 x TTL)
  • 16 x GPIO
  • 12 V power supply with ATX-Funktion
  • Size: 130 mm x 100 mm


rBaseETX® (Ultra compact ETX® Baseboard)

rBaseETX®
The BaseETX® is based on the on the successful ETX®-standard and was developed especially for Public Displays. The direct support of light and temperature sensors in combination with the available speed control makes an effective selfmanagement possible. With IEC-, SM- or I²C-Bus is it easy possible to adapt further sensors.

Key Features

  • Ultra compact ETX® Baseboard
  • ETX® 3.0 compatible
  • VGA
  • LVDS with DDC-channel and Power for TFT-Timing Control

Board Details

  • Market Segments: Automotive/A.Supply, Gaming/Entertainment, Industrial Automation, Medical, POS/POI-Point of Sale/Point of Info, Test & Measurement
  • VGA
  • LVDS with DDC-channel and power for TFT-Timing Control
  • COM1 (RS232), COM2 (TTL)
  • 4 x USB # Mouse-Keyboard
  • Light sensor (SM-Bus)
  • IrDa, Power-LED, analogue light sensor
  • TFT-Backlight control (On/Off, Dimming, Power)
  • IEC-Bus for additional sensors
  • 5 independent fan control
  • Temperature controlled speed
  • 16 GPIO, free programmable, TTL
  • Audio Line-In, Line-Out
  • Speaker (5 Watt)
  • CF-Card-Slot
  • mini PCI Slot
  • Size: 160 x 130 mm
  • 9-28 V power supply with ATX-function


Back

Stay connected