Products
Industries
IoT
One of the new challenges arising with the use of edge, fog, and cloud architectures is the connection of components to each other and to the public cloud. An important element of developing a solution capturing all pieces is the IoT framework susietec
At the field, or edge level, data is collected by industrial computers, e.g. by gateways, which process, filter, analyze and act on these data in real-time right at the device.
Edge, fog and cloud applications demand increasing computing power. The interfaces to sensors or machines often require non-standard solutions. Especially in smaller machines, space is limited or restricted in some dimension and need a special solution.
Today, the connection from the sensor device to the embedded cloud takes place via real-time data communication, on sensor and edge level - for example Industrial Ethernet or fieldbuses - and gateways , which provide the transformation of real time data into the informational area.
Support & Services
Contact
For support related inquires, please contact our support team:
Contact Support
Downloads
We provide our customers with additional material enhancing their knowledge. Find all White Papers, Use Cases and brochures here.
Learn more about how Kontron supports its customers by improving their products and solutions. Read our Use Cases. Contact us for further information.
Learn more about our solutions for various industries by downloading our Whitepapers.
We provide our customers with additional material enhancing their knowledge. Find all White Papers, Use Cases and brochures here.
Get extended insights into our products and solutions by participating in our webcasts. You can find all webcasts here. Contact us for further information.
Learn more about our solutions for various industries by downloading our Whitepapers.
ETX Breaks Into the GHz Area for the First Time
ETX CPU Modules now with up to 1 GB Memory and 1.2 GHz Processor Speed
Kontron´s new ETX CPU modules for customized applications include the ETX-P3M with Intel® processors from 650MHz to 1.2 GHz and the ETX-VE VIA EDEN/C3 with processors from 400 MHz to 800 MHz. These boards offer an extremely high functional density using the VIA Twister-T chipset and the fast 133 MHz front side bus. This allows the highest levels of performance to be offered at an extremely attractive cost/performance ratio. To date, the ETX-P3M is the only ETX module on the market to offer CPU speeds in excess of 1GHz and up to 1GB of RAM.
The ETX-P3m employs Intel processors from the Mobile Pentium® III family. Due to their reduced core voltage and higher clock rates, these processors enable the ETX-P3M to achieve even lower levels of power consumption than its predecessors, the ETX-P3 and ETX-P3E modules. The ETX-P3M also is the first ETX board to include a 1GB (1024MB) SO-DIMM memory module. Thus, the available processor speed and memory are more than enough for todays most complex applications.
The ETX-VE series addresses the mid-performance segment and its use of VIA processors provides extremely low-power modules. The VIA-EDEN family of processors is optimized for very low levels of power consumption. Therefore, heat generation is kept to a minimum.
The new ETX modules include high-performance graphics with LVDS flat panel support, 10/100BaseT Ethernet, sound, 2xEIDE (UDMA-100) and 4 USB ports as well as all the usual standard PC interfaces.
Press Contact:
Christian Eder Marcom Manager EMEA
Brunnwiesenstr. 16
D - 94469 Deggendorf
christian.eder@kontron.com
Phone: +49 991 37024-702
Contact Person:
Matthias Huber Product Manager
matthias.huber@kontron.com
Phone: +49 991 37024-647
Download press photo (high resolution jpg):
Download this pressrelease (English, RTF):
Download this pressrelease (German, RTF):
