#########################################################################	
#									#
#   Readme_WES7_B3C01.txt file						#
#									#
#   Edition 4.2								#
#   2011-06-17								#
#									#
#   (c) by KONTRON MODULAR COMPUTERS 2011				#
#									#
#########################################################################

################ History ################################################

Version 01		11-August-2011
Version 02		15-September-2011
Version 03		21-November-2011

############################# Introduction ##############################

All supported BSP components were tested on a reference image 
created by the Image Builder Wizard which was booted from the WIN7 
Embedded x64 Runtime DVD.

All Windows Standard 7 BSP components can be used in the same way as in
the Windows 7 OS. There are no differences. Therefore the Windows 7 BSP 
components can be downloaded on the same Kontron web location and can be 
used for the Embedded OS.
 
######################### Reference OS Creation #########################

Creation process of the test reference image:

1) Booting from WES7 DVD Runtime x86
2) Start Wizard with "Build an Image"
3) Choose the "Application Compatibility" template
4) Start the installation process
5) After finishing installation install the standard Windows 7 32 bit
   Board Support Packages (BSP) from the Kontron website
   
 
################ Restrictions ###########################################

- unresolved CompositeBus device
  After all BSP components are installed on the target system there is 
  still one unresolved device (Root\CompositeBus) present in the 
  device manager section.

  The Root\CompositeBus device is not recognized by the
  Image Builder Wizard during OS creation.

  To solve this problem during Image Builder Wizard process:

  Preperation for installing the composite package:
  1) Navigate to the following directory on the WES7 32bit runtime DVD 
     and unpack the *.cab file to get all the files needed in original 
     ("X" stands for the DVD drive) form:
      X:\DS\Packages\Driver\x86~winemb-inf-compositebus~~~~6.1.7600.16385~1.0\
     Copy these directory structure to a suitable storage media 
     (for example USB stick).
      
  Installing WinEmb-INF-compositebus during OS creation:
  2) In the section "Summary of drivers and features" click on
     "Modify Drivers".
  3) In the section "Find and select device drivers" click on 
     "Automatically detect devices"
  4) In the section "Confirm drivers to install" click on
     "Browse"and go to the location where the Compositebus driver 
     is stored.
  5) Add the compositebus driver to the image

  To avoid this problem install WES SP1
   
- CHIPSET

  Related packages:
  WIN-CHIP001_R11

- ETHERNET

  Related packages:
  WIN-ETH003_R12

- GRAPHICS

  Related packages:
  WIN-GRAPH001_R11

- HWMON

  Related packages:
  WIN-HWMON001_R11

- STORAGE	

  Related packages:
  WIN-STORE001_R11

- AUDIO

  Related packages:
  WIN-AUDIO001_R10

- KOMMISC

  Related packages:
  WIN-MISC002_R13

- IPMI
  Related packages:
  WIN-IPMI001_R11