IoT

One of the new challenges arising with the use of edge, fog, and cloud architectures is the connection of components to each other and to the public cloud. An important element of developing a solution capturing all pieces is the IoT framework susietec

At the field, or edge level, data is collected by industrial computers, e.g. by gateways, which process, filter, analyze and act on these data in real-time right at the device.

Edge, fog and cloud applications demand increasing computing power. The interfaces to sensors or machines often require non-standard solutions. Especially in smaller machines, space is limited or restricted in some dimension and need a special solution.

Today, the connection from the sensor device to the embedded cloud takes place via real-time data communication, on sensor and edge level - for example Industrial Ethernet or fieldbuses - and gateways , which provide the transformation of real time data into the informational area.

Downloads

We provide our customers with additional material enhancing their knowledge. Find all White Papers, Use Cases and brochures here.

Learn more about how Kontron supports its customers by improving their products and solutions. Read our Use Cases. Contact us for further information.

Learn more about our solutions for various industries by downloading our Whitepapers.

We provide our customers with additional material enhancing their knowledge. Find all White Papers, Use Cases and brochures here.

Get extended insights into our products and solutions by participating in our webcasts. You can find all webcasts here. Contact us for further information.

Learn more about our solutions for various industries by downloading our Whitepapers.

Product Comparison


	VX3058
	3U VPX Intel® Xeon® Processor Single Board Computer
Processor	Intel® Xeon® D-1500 Octa Core™, TDP 35W, 1.6/1.7 GHz (8 execution cores, 16 threads, 12 MB) DDR4 dual channel memory with ECC, 2133 Mbits/s over 144 bits, up to 16 Gbytes PCIe gen3 x8 ports to VPX and XMC, up to 8 GT/s
Form Factor	3U VPX, 1’’ (5HP) Slot profile: SLT3-PAY-2F2U-14.2.3, SLT3-PAY-1F1F2U-14.2.4, SLT3-PAY-1F1U-14.2.10
Main Memory	Up to 32 GB dual channel DDR4 SDRAM running at 2133 MT/s, with ECC, soldered
Available I/Os	Front Panel USB: 1x USB 2.0 port GIGABIT ETHERNET: 1x RJ-45 connector: 10/100/1000BASE-T Ethernet Note: This port is configurable from the BIOS to be routed to the VPX rear connector HDMI (OPTION): HDMI connector as option. This includes a HDMI front-I/O module and a M.2 mezzanine for 2D graphics. Remark: HDMI front I/O and XMC support are exclusive. SERIAL: 1x RJ-11 connector: Two EIA-232 interfaces or one EIA-485 interface without hardware flow control LEDS: 5 LEDs reporting the board CPU health status and activity RESET: Push button Backplane PCIe: x8 PCIe 3.0, non-transparent capability, on P1. Configurable as 1 x8, 2 x4, or 4 x2 SATA: 2 SATA 6 Gb/s links on P1, 2 additional SATA 6 Gb/s links on P2 USB: 2 USB 2.0 and 1 USB 3.0 port on P1, 1 additional USB 2.0 link on P2 UART: Two serial lines (Rx, Tx only) on P2, for RS-232 or RS-422/485 dynamically configured Ethernet: Two 10GBASE-KR or 1000BASE-KX on P1, one 1 1000BASE-T on P1, 2nd 1000BASE-T on P2 (both front/rear switchable, onboard magnetics) GPIO P1: GPIO1, GPIO2/Maskable reset, OpenVPX GDISCRETE1, VBAT GPIO P2: SYSCON. 2x multiplexed GPIO3/4 or SFI I2C Video: DVI port on P2 as option. This includes a M.2 mezzanine for 2D graphics.
Security	Dual secure elements, TPM and Wibu, which can be enhanced with Kontron SEC-LINE product
Watchdog	PLD-based, timeout ranging from 2 µs to 510s, IRQ, Reset, dual-stage
Flash	2x16 MB FLASH, with recovery image and uEFI BIOS settings
Power Supply	On P0: VS1=12V and 3.3V_AUX; VS2 not used; VS3=5V not used; -12V_AUX for XMC slot option
Drives	60 GB SSD M.2 Option
Cooling	Air, Extended Temperature Air, and Conduction-cooled options

Product Comparison

Stay connected