KTT30/mITX w. Nvidia Tegra 3, 2GB DDR3, 16GB NAND Flash, Linux BSP / OS loaded
  • ARM Cortex-A9 Quad Core 900MHz Processor with NEON Technology
  • Integrated Chipset
  • DRAM Up to 2 GB DDR3L memory down
  • Graphics Ultra low power NVIDIA GeForce GPU with enhanced 3D capabilities; 1080p H264 MPEG-4 encoding/decoding Video Processor
  • HDMI 1.4a (up to 1920x1080 pixel), and 24 bit LVDS (up to 2048x1536 pixel @ 18bpp), support for 2 independent displays
  • 1x mPCIe, 1x mPCIe/mSATA, 1x mPCIe for 3G (oboard SIM socket) 2x SD card
  • Target power consumption < 7W, full board
  • USB 3x port USB 2.0 (2x Type A and 1x Micro (supports also device mode)
  • Serial port 2x RS232 (1x 8wire RS232 port and 1x port which can be used either as cc-talk or 4wire RS232)
  • Ethernet 1x 10/100/1000 Ethernet Controller
  • CSI/DSI/12-bit par. Camara input, Bootable eMMC
  • Mass Storage 2x SD Card, 1x eMMC ( Bootable), 1x SATA 2.0
  • Sound Line in/out/mic, S/PDIF in/out (electrical)
  • Operating temp. 0°C to 60°C
Download Datasheet

As part of Kontron's strategic entry into ARM processor technology, Kontron has unveiled its first embedded ARM based motherboard in the Mini-ITX form factor (170mm x 170 mm). The Kontron KTT30/mITX is equipped with NVIDIA's Tegra 3 super processor and combines outstanding media performance with particularly low power consumption. With its integrated, ultra low-power GeForce GPU, the ARM Cortex-A9 900MHz Quad-Core processor board offers impressive 3D graphic performance and delivers a total energy consumption of just under 7 watts. These performance features make the board ideal for a wide spectrum of graphics- and video-oriented embedded applications like thin clients, Panel PCs and Mini-Box PCs, which are to be found in nearly all embedded computing vertical markets. The board which has a long-term availability of at least seven years is also predestined for markets such as medical, rail traffic and public safety.

Thanks to its standardized Mini-ITX form factor, the Kontron KTT30/mITX paves an efficient path for OEMs to integrate innovative ARM technology straight off-the-shelf and into their embedded applications. Not only are a wide range of Mini-ITX peripherals already available, but OEMs also benefit from Kontron's comprehensive customization services and extensive software support for Android and Linux which serve to minimize development time and costs. Besides the numerous USB and RS232 interfaces, several audio and video interfaces as well as miniPCIe extension slots, the Kontron KTT30/mITX offers a selection of interfaces to suit nearly every possible application. The extremely low-power consumption facilitates small passive cooling solutions which additionally reduce the bill of materials and development effort while simplifying implementation. Due to the board's low height of just 15.2 millimeters, extremely flat systems can be built and mounted directly onto the back of monitor and video panels, i.e. for HMIs or cost-efficient digital signage players. In addition, the board supports Full-HD (1080 p) video for both playback and recording purposes - making it an ideal platform for video conferencing systems or security applications. As with all Kontron embedded motherboards, the new Kontron KTT30/mITX comes with a long-term availability of at least seven years as well as its outstanding and durable stability and reliability due to its high-quality board layout and selected top-grade components.

The Kontron KTT30/mITX is based on the NVIDIA® Tegra 3 processor with four ARM Cortex-A9 CPU cores each with up to 900 MHz. An additional core with up to 500 MHz clock speed reduces power consumption to less than 1 watt in phases, when just media playback or background services are running. With its integrated 12-core NVIDIA® GeForce® GPU for low-power applications, life-like 3D graphics with dynamic lighting are possible at screen resolutions of up to 2048 x 1536 pixels. It also offers HDMI 1.4a and 24 bit LVDS video interfaces. Thanks to the integrated video encoder and decoder, as well as high resolution video playback it offers real time video compression, which can, for example, be supplied via the CSI/DSI camera port. Peripheral devices can be connected via three USB 2.0 ports and two RS232 ports. Operating system and application data can be hosted on the bootable eMMC. Two PCIe slots, one of which can also be used as an mSATA port, are available for application-specific extensions. An RJ45 Gigabit Ethernet port and analog audio-I/Os add the final touches to the feature set.


Form Factor Mini-ITX
Dimensions (H x W x D) 6.7” x 6.7”

(17,0 cm x 17,0 cm
CPU Supporting:

NVIDIA Tegra 3ybr>
ARM Cortex-A9 Quad Core 900MHz
Chipset -
Main Memory Up to 2 GB DDR3L memory down
Front Side Bus -
Graphics Controller NVIDIA GeForce GPU

Enhanced 3D capabilities

1080p H264 MPEG-4 encoding/decoding Video Processor

support 2 independent displays
Graphics 1x HDMI 1.4a (up to 1920x1080 pixel)

1x LVDS 24bit (up to 2048x1536 pixel @ 18bpp))

DSI (up to 1440x900 @ 18bpp)
Ethernet Controller Intel® 82574L
Ethernet 1x 10/100/1000 Mbit LAN
Hard Disk 1x SATA (SATA 150/300)

1x mSATA shared with Mini-PCI Express
Parallel Port n/a
Flash Onboard 1x eMMC (Bootable)
PCI n/a
PCI Express / PCI support -
Mini-PCI 1x Mini-PCI Express x1

1x Mini-PCI Express x1 shared with mSATA
USB 3x USB 2.0

(2x Type A and 1x Micro (supports also one port USB client mode))
IEEE 1394 Firewire n/a
Serial 2x RS232
Rear I/O 2x USB 2.0 Type A

1x USB 2.0 micro (USB client)


1x Audio (LineIn, LineOut, Mic)

1x Power external
Audio Controller Two integrated audio controllers

(PCM and Inter-IC Sound, called IIS or I2S)
Keyboard via GPIO or USB
Special Features Up to 18 GPIOs on a Feature connector

USB modem card interface with SIM card socket

One SPITM interface (3.3V) on a pin header

Serial Atmel® touch screen interface (I2CTM)

CSI/DSI/12-bit par. Camera input

2x SDcard socket
BIOS Bootloader on SPI Flash
Power Management
Operation Temperature 0°C to 60°C (32°F to 140°F)
Operating System WEC7


Compliance EN 61000-4-2:2000 ESD Immunity

 EN55022:1998 class B Generic Emission Standard



Datasheet KTT30/mITX
Datasheet KTT30/mITX
[ datasheet_ktt30-mitx.pdf, 1.14 mb, 2016/01/12 ]


KTD-N0857 KTT30 Users Guide
[ ktd-n0857-b-ktt30-users-guide.pdf, 1.56 mb, 2014/01/10 ]

KTT30/mITX Tips & Hints
[ ktt30-mitx_tipsandhints.pdf, 0.03 mb, 2013/11/27 ]


KEAPI package for KTT30/mITX
Kontron Embedded API Package for KTT30/mITX including Documentation, Sample Applications and Remote Server Application.
[ ktt30-mitx_keapi-package.zip, 15.93 mb, 2013/11/27 ]

KTT30/mITX LCD Panel Support Files
LCD Panel Support Documentation and Samples
[ ktt30-mitx_lcd-panel-support.zip, 0.65 mb, 2013/11/27 ]

Cable Specifications

PN 821016 Cable COM2 200mm 2.54
[ 821016-cable-com2-200mm-2.54.pdf, 0.18 mb, 2013/11/27 ]

PN 821017 Cable COM2 100mm 2.54
[ 821017-cable-com2-100mm-2.54.pdf, 0.13 mb, 2013/11/27 ]

PN 821515 Open End LVDS Cable 572mm
[ 821515-open-end-lvds-cable-572mm.pdf, 0.25 mb, 2014/08/19 ]

PN 821155 Cable LVDS Open-End 1080mm
[ 821155-cable-lvds-open-end-1080mm.pdf, 0.26 mb, 2013/11/27 ]

PN 1052-5080 Cable ATX Power for KTT30
[ 1052-5080-cable-atx-power-for-ktt30.pdf, 0.12 mb, 2014/08/19 ]

PN 1055-5493 Cable Front Panel 16pol Open-End
[ 1055-5493-cable-front-panel-16pol-open-end.pdf, 0.07 mb, 2014/08/19 ]

Mechanical Drawings

KTT30/mITX 3D Drawing in pdf
[ ktt30-mitx_3d-pdf.pdf, 3.71 mb, 2013/11/27 ]

KTT30/mITX 3D Drawing in IGS
[ ktt30-mitx_igs_130902.zip, 14.65 mb, 2013/11/27 ]

KTT30/mITX 3D Drawing in STP
[ ktt30-mitx_stp_130902.zip, 4.75 mb, 2013/11/27 ]

KTT30/mITX 2D Drawing in pdf
[ ktt30-2d.zip, 0.72 mb, 2013/11/27 ]


U-Boot Update Package for KTT30/mITX
[ ktt30-mitx_u-boot-update-package-r100a.zip.zip, 9.65 mb, 2013/11/27 ]


Binary Ubuntu Kernel + Libraries
R 1.00 For source code please contact sbc-support@kontron.com .
[ ktt30-mitx_linux-kernel-lib-r100.zip, 18.02 mb, 2013/11/27 ]

Linux Root File System Install Script
R 1.00
[ ktt30-mitx_linux-rootfs-script-r100.zip, 37.18 mb, 2013/11/27 ]

Tech Spec Sheet

Tech Specs MINI-ITX
[ tech-spec_mini-itx.pdf, 0.52 mb, 2016/02/29 ]


Kontron Services Brochure
[ kontron-services-brochure.pdf, 0.37 mb, 2015/11/19 ]


KTT30/mITX KTT30/mITX w. Nvidia Tegra 3, 2GB DDR3, 16GB NAND Flash, Linux BSP / OS loaded more
KTT30/mITX Basic
KTT30/mITX Basic KTT30/mITX Basic, w. Nvidia Tegra 3, 1GB DDR3, no NAND Flash, Linux BSP / OS loaded  


COM port Cable, 100mm
COM port Cable, 100mm COM port Cable, 2.54mm, 100mm long more
COM port Cable, 200mm
COM port Cable, 200mm COM port cable, 2.54mm, 200mm long  
SATA Cable 500mm
SATA Cable 500mm SATA Cable 500mm long more
LVDS Open-End Cable
LVDS Open-End Cable LVDS Open-End Cable 540mm more
LCD LVDS Cable for JAE FI-S20
LCD LVDS Cable for JAE FI-S20 LCD LVDS Cable for JAE FI-S20 w. pull tab (i.e. for Sharp LQ104S1LG21)  
LVDS 1:1 Cable
LVDS 1:1 Cable LVDS 1:1 cable, 2x 40 pin connector, 405mm  
AUO G121SN01 Cable
AUO G121SN01 Cable Cable for AUO G121SN01 more
LCD Cable for LG.Philips LM150X08
LCD Cable for LG.Philips LM150X08 LCD cable for LG.Philips LM150X08  
Front Panel Open-End Cable
Front Panel Open-End Cable Front Panel Open-End Cable more
Cable COM2 100mm Bracket
Cable COM2 100mm Bracket Cable COM2 100mm Bracket more
DP to DVI Adapter
DP to DVI Adapter DP to DVI Adapter  
LDI (Large Display Interface) Evaluation Kit
LDI (Large Display Interface) Evaluation Kit LDI Evaluation Kit contains of: 820975 LDI module, 821521 Evaluation Cable Kit and 1027-3591 LVDS Cable 2x40p conn 405 mm more
LVDS Connector for cable
LVDS Connector for cable LVDS Connector for cable more


Info Request

Contact Tech Support

Comparisons (up to 5 products)

There are currently no products in your Comparison.


EMD Customer Section

This section is exclusively for Embedded Modules Customers. After registering you will gain access to BIOS images, product change notifications (PCNs), 3D models for CAD, and software development tools.

Click below to login or register.

*Please allow 24 hours to process your confirmation. You will be informed via email when your access to
the Modules Customer Section is granted.

Stay connected