mITX-BDW-U New

Low power, IoT ready embedded mITX motherboard with 5th generation Intel® 14nm Core I7, I5 & I3 processor
Specifications
  • embedded mITX motherboard with up to 7 years availability
  • thin profile, low power platform with 15W CPUs in 23mm envelope
  • supporting 3 independent displays pipes via 2x DisplayPort and LVDS
  • operating temperature range from 0°C to +60°C
  • powered by 19V notebook-style power adapter or internal 12V connector
Download Datasheet

Digital Signage: Low profile, low power & multi display support
Gaming/POS/POI: High graphics and high CPU performance-to-power ratio
Industrial Automation: Wide range of I/Os & longevity
Future-oriented Devices: IoT support through e. g. WWAN support. SATA and x2 PCIe SSD support in M.2 socket.

Features

Form Factor Thin Mini-ITX
Dimensions (H x W x D) 6.7” x 6.7”
(17,0 cm x 17,0 cm)
CPU Supports:
5th Generation Intel® 14nm Dual and Quad Core i7, i5, i3 up to 15W
Intel® Core™ i7-5650U, 2x 3.1GHz 15W
Intel® Core™ i5-5350U, 2x 2.9GHz 15W
Intel® Core™ i3-5010U, 2x 2.1GHz 15W
Chipset Intel® Broadwell PCH-LP on multi-chip package BGA with CPU
Main Memory up to 16 GB SO-DIMM Socket DDR3L-1333/1066
(max. 2x 8 GB)
Front Side Bus -
Graphics Controller Intel ® Gen 8 HD Graphics 6000
OpenGL 4.0
Graphics 2x Display Port, up to 3840x2160
(1xHDMI by DP, up to 2560x1600)
1x LVDS 18/24bit, up to 1920x1200
Triple Display support
Ethernet Controller 1x Intel® Clarksville WGI218LM (supporting AMT 9.0)
Intel® Pearsonville I211AT
Ethernet 2x Intel® GB LAN (1x AMT 9.0 support)
Hard Disk 2 x SATA (SATA 150/300/600) w. RAID 0,1 support
(1x mSATA shared with mPCIe)
Parallel Port n/a
Flash Onboard -
PCI n/a
PCI Express / PCI support 1x PCIe x2
Mini-PCI 1x mini-PCI Express half/full w/ 2x USB 2.0 support
USB 4x USB 3.0/2.0
4x USB 2.0 (2x Internal Header, 2x mPCIe socket)
Serial 2x RS232
Rear I/O 19V notebook-style Power adapter
2x Display port
4x USB3.0/USB2.0
2x RJ45 LAN
2 x1 Audio Jack; Headset and Line In
Audio Controller Realtek ALC662
HD Audio 5.1 channel
SPDIF Out, microphone, headset, On-board speaker
Keyboard PS/2 Keyboard/Mouse
Special Features DAC up to 160 GPIO
TPM
KT embedded feature port with ADC
SIM Card Connector
No Tantalum capacitors on board
BIOS Phoenix
Power Management ACPI 4.0 ATX+12V PSU 4-pin on internal 2x2 pin connector; 19V Power
Operation Temperature 0°C to 60°C (32°F to 140°F)
Operating System Win7/Win8 32/64bit
Linux
Compliance EN 61000-4-2:2000 ESD Immunity
EN 61000-4-4 Burst Immunity
EN55022:2006+A1:2007 class B Generic Emission Standard
IEC 60950-1: 2005, 2nd Edition
UL 60950-1
CSA C22.2 No. 60950-1
IEC 60068-2-27
60068-2-29
60068-2-64
RoHS
MTBF Theoretical MTBF: 365475 hours @ 30ºC

Downloads

Datasheets

Datasheet-mITX-BDW-U
[ mitx-bdw-u.pdf, 1.22 mb, 2016/05/18 ]

Manuals

mITX BDW-U Userguide
[ mitx-bdw-u-user-guide-rev-1.2-2016-06-16.pdf, 5.42 mb, 2016/06/21 ]

Tech Spec Sheet

Tech Specs MINI-ITX
[ tech-spec_mini-itx.pdf, 0.52 mb, 2016/02/29 ]

Services

Kontron Services Brochure
[ kontron-services-brochure.pdf, 0.37 mb, 2015/11/19 ]

Variants

mITX -BDW -U i7-5650U
810610-4500
mITX -BDW -U i7-5650U with Intel i7-5650U, 4M, up to 3.1 GHz, 15W; GT3, w. cooler  
mITX -BDW -U i5-5350U
810611-4500
mITX -BDW -U i5-5350U with Intel i5-5350U, 3M, up to 2.9 GHz, 15W; GT3, w. cooler  
mITX -BDW -U i3-5010U
810612-4500
mITX -BDW -U i3-5010U with Intel i3-5010U, 3M, up to 2.1 GHz, 15W; GT2, w. cooler  

Accessories

DDR3L-1600 SODIMM 2GB
1060-2520
DDR3L-1600 SODIMM 2GB DDR3 SDRAM, 204pin, Speed = 800MHz / DDR3L-1600 / 1.35V / PC3-12800  
DDR3L-1600 SODIMM 4GB
1060-2522
DDR3L-1600 SODIMM 4GB DDR3 SDRAM, 204pin, Speed = 800MHz / DDR3L-1600 / 1.35V / PC3-12800  
DDR3L-1600 SODIMM 8GB
1060-2524
DDR3L-1600 SODIMM 8GB DDR3 SDRAM, 204pin, Speed = 800MHz / DDR3L-1600 / 1.35V / PC3-12800  
LVDS Connector for cable
910000005
LVDS Connector for cable LVDS Connector for cable more


back

Info Request

Contact Tech Support

Comparisons (up to 5 products)

Services

EMD Customer Section

This section is exclusively for Embedded Modules and Motherboards Customers. After registering you will gain access to BIOS images, product change notifications (PCNs), 3D models for CAD, and software development tools.

Click below to login or register.

*Please allow 24 hours to process your confirmation. You will be informed via email when your access to
the Modules Customer Section is granted.

Stay connected