mITX-BW

Long term availability mITX-BW with Intel Celeron and Pentium™ N3xxx system on chip (SOC)
Specifications
  • Intel® Celeron and Pentium™ N3xxx SoC (2 or 4 cores), TDP: 4-12W
  • SO-DIMM Socket DDR3L-1600 Memory (up to 8GB)
  • Intel® Gen7 Graphics, OpenGL 4.2, OpenCL 1.2, DX12, H.265/264, MPEG2, MCV, VC-1, VP8
  • LVDS 24Bit dual channel and Display Port 1.1a
  • 10/100/1000MBit RJ45 Ethernet LAN, GPIO
  • 2 SATA 3.0 (up to 6GB/s), 1 SATA multiplex with mSATA/mPCIe in mPCIe connector
  • SIMCARD Socket supporting 3G/4G modules in mPCIe connector
  • 4 USB2.0/3.0 with 3 additional internal USB 2.0 interfaces via mPCIE and front panel connector
  • Additional CAN Bus and RS485 interface
  • Bootable onboard 16GB eMMC NAND Flash
  • Long-term available up to 7 years
Download Datasheet

The up to 7 years long-term availability Mini-ITX embedded motherboard with Intel® Celeron and Pentium™ processor N3xxx SoC series is immediately deployable. With an ATX-compatible design, a large number of system components are already available, which reduces individual development work to a minimum. The embedded industry design differentiates the board significantly from commercial Mini-ITX offerings which are less robust and only available in identical configuration for short periods. This also has an influence on the interfaces. The board supports not only 2x Display Port 1.1a but also 24bit LVDS on the most performance Industrial Automation version. And, besides the innovative IoT connection via 3G/4G SIM card-slot, serial interfaces are available too. The mPCIe slot supports mSATA or mPCIe extensions. The operating system and application code can be stored on the mITX-N3xxx on the on-board 16 GB-sized bootable NAND Flash memory (eMMC). Numerous standard interfaces, amongst others GbE, SATA, CAN, RS485 and USB, are also integrated on this new Mini-ITX motherboard.

Downloads

Datasheets

Datasheet mITX-BW
[ mitx-bw_20170209_datasheet.pdf, 1.6 mb, 2017/02/10 ]

Manuals

mITX-BW User Guide
Rev. 1.4 April 18, 2017
[ mitx_bw_user_guide_rev_1.4-2017-04-18.pdf, 2.15 mb, 2017/04/20 ]

Tech Spec Sheet

Tech Specs MINI-ITX
[ tech-spec_mini-itx.pdf, 0.52 mb, 2016/02/29 ]

Services

Kontron Services Brochure
[ kontron-services-brochure.pdf, 0.37 mb, 2015/11/19 ]

Variants

mITX-BW QC 1.6 GHZ (N3700)
810620-4500
mITX-BW QC 1.6 GHZ (N3700) Long term availability mITX-BW with Intel Celeron and Pentium™ N3xxx system on chip (SOC)  
MITX-BW QC 1.6 GHZ (N3150)
810621-4500
MITX-BW QC 1.6 GHZ (N3150) Long term availability mITX-BW with Intel Celeron and Pentium™ N3xxx system on chip (SOC)  
mITX-BW QC 1.6 GHZ (N3060)
810622-4500
mITX-BW QC 1.6 GHZ (N3060) Long term availability mITX-BW with Intel Celeron and Pentium™ N3xxx system on chip (SOC)  

Accessories

DDR3L-1600 SODIMM 1GB E2_MB
1060-2526
DDR3L-1600 SODIMM 1GB E2_MB DDR3L-1600, 1GB, 204P, 800MHZ, PC3-12800 1,35V SODIMM, E2 industrial temperature -40°C to +85°C  
DDR3L-1600 SODIMM 2GB E2_MB
1060-2528
DDR3L-1600 SODIMM 2GB E2_MB DR3L-1600, 2GB, 204P, 800MHZ, PC3-12800 1,35V SODIMM, E2 industrial temperature -40°C to +85°C  
DDR3L-1600 SODIMM 2GB_MB
1060-2520
DDR3L-1600 SODIMM 2GB_MB DDR3L-1600, 2GB, 204P, 800MHZ, PC3-12800 1,35V SODIMM;  
DDR3L-1600 SODIMM 4GB E2_MB
1060-2530
DDR3L-1600 SODIMM 4GB E2_MB DDR3L-1600, 4GB, 204P, 800MHZ, PC3-12800 SODIMM, 1.35V / PC3-12800, E2 industrial temperature -40°C to +85°C  
DDR3L-1600 SODIMM 4GB_MB
1060-2522
DDR3L-1600 SODIMM 4GB_MB DDR3L-1600, 4GB, 204P, 800MHZ, PC3-12800 SODIMM; 1.35V  
DDR3-1600 SODIMM 8GB E2_MB
1060-2532
DDR3-1600 SODIMM 8GB E2_MB DDR3L-1600, 8GB, 204P, 800MHZ, 1,35V PC3-12800; E2 industrial temperature -40°C to +85°C  
DDR3L-1600 SODIMM 8GB_MB
1060-2524
DDR3L-1600 SODIMM 8GB_MB DDR3L-1600, 8GB, 204P, 800MHZ, PC3-12800/ 1.35V  


back

Info Request

Contact Tech Support

Comparisons (up to 5 products)

There are currently no products in your Comparison.

Services

EMD Customer Section

This section is exclusively for Embedded Modules and Motherboards Customers. After registering you will gain access to BIOS images, product change notifications (PCNs), 3D models for CAD, and software development tools.

Click below to login or register.

*Please allow 24 hours to process your confirmation. You will be informed via email when your access to
the Modules Customer Section is granted.

Stay connected